Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Bi-Amping from an AV Receiver?
View Single Post
Old 06-19-06, 08:13 AM   #10 (Link)
 
Ayreonaut
Moderator Emeritus
Alias: Naut
Loc: Richmond, VA
Ayreonaut's Avatar
User: #203
Since: Apr 2006
Posts: 617
Ayreonaut is offline
Re: Bi-Amping from an AV Receiver?


Well guys, now I've been there and back again. The Audioholics review warned that some people will get a hiss, and I got a slight hiss and an audible hum. The sonic benefits were slight, if any, and the hum was unacceptable so I put it all back the way it was. I did leave the main speakers bi-wired since the wires were already in place.

My manual for the Denon AVR-1905 is not very good. Are the A and B terminals for the mains are in parallel or series?


We are the Shack. Existence as you know it is over.
We will add your biological and technological distinctiveness to our own.
You will be mapped. Resistance is futile.

Forum Rules Reply With Quote