| Re: My Graph
I agree with brucek – the 50 Hz issue is to narrow to worry about and I doubt you can set an EQ filter narrow anyway.
It looks like ~ 35 Hz is about as low as this sub is going to go with equalization. Even then, keep an eye out to make sure you’re not overdriving it. It’ll bottom out loudly if that happens.
If you end up with response issues an octave or so below the crossover point, you might try equalization there as a last resort. The problems are phase-related, but I’ve seen many cases where it made a difference. Probably because the equalizer introduces its own phase changes.
Regards,
Wayne
|