| Re: My Graph
So you adjust all the filters and then run the REW calibration with Check levels etc... What about the targetlevel that drops after each peakadjustment + remeasuring? If I adjust from 35 Hz to 80, I will have to go back to 35 again and lower that peak again since the targetlevel is lower now....If I remember correctly..Maybe the targetlevel stayed put and only changed when i pushed set target level... It´s in the middle of the night now and I don´t want to wake anybody up. This are my thoughts anyway. Thank you for your time! ( The mains are not connected in that measurement)
//Jonten
|