Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Trying to do a 12" DIY job
View Single Post
Old 09-14-07, 08:59 AM   #8 (Link)
WillyD
Senior Shackster
Alias: Will
Loc: Matthews, NC
User: #2437
Since: Sep 2006
Posts: 500
  WillyD is offline  
Re: Trying to do a 12" DIY job


Quote:
bamaboy wrote: View Post
well is a single 4" port going to be enough?

im trying to keep it on the cheaper side, and 140$ for the radiator is kinda expensive

or should i do 2 3"s, because 2 4" are like 50" long
Nope...neither a single 4" or two 3" ports are really enough for this sub.

But obviously, going with two 4s or a single 6 is out of the question. Yeah, the PR is kinda expensive, and I'd usually never recommend one, but it would be the best way to get the most performance possible out of this sub in around 2.5ft^3.

But if you port it, I'd go with a single, nicely flared 4" port, like the aero you mentioned.


Forum Rules Reply With Quote