[Fi Audio]

Actually yes and no...lol
The 15" single 2 Ohm sub is done and we will start production on those when I return from a business trip (start in about 2 weeks). This one has 22mm of Xmax and is mechanically limited (24.5 mm of Xmag). These are a 2" coiled sub and will probably go for $119 shipped for 4 or more. They are decently efficient and lower power handling (then again they dont need as much either). About 250W gets them to Xmax at 20Hz.
The 18" single 2 Ohm is a 3" coiled sub and has a low .81mH inductance. This is the one I am doing one last iteration on to get the qts right where I want it. Last iteration ended up being .68 which some feel is a little high. Next one FEAs for .61 and Ill machine that when I return as well.
We will have parts on hand for both when I return and I will most likely just have to machine the larger 18" sub a little when we get things in... probably $209 for 30mm of Xmax.

Ill get specs up soon for these and start a new post as well. These wont be on the Fi site and I wont really "market" them. More of a HTS and CIB forum "in the know" type thing.

Thanks,
Scott