Quote:
Anthony wrote:
 Hey Mike, I just finished looking at the Liberty connectors. They seem on par with all of these. Good grip center connector, looks to be easy strip and crimp, and the connectors look beefy and well made.
The inspection window is a novel idea as well to see if the compression ring seated all the way. One thing I like about the Canare is that you can hear and feel a click when the center pin locks into the RCA connector.
I don't think you can go wrong with either. If you want to save yourself the tooling costs, BlueJeansCable is a great company to deal with. I personally have enjoyed making my own cables (for me and customers). It amazes people how great these relatively cheap cables can sound -- especially when they're coming off Audioquest, MIT, or Monster products at much higher prices.
Also, if you do decide to get the tools yourself, check out ebay and other places. I ocasionally see these crimpers used. I know Parts Express has a generic crimp tool that works well with most of the F-conn stuff and is only $30. As for the Canare, I ended up with the real deal and don't regret it. They're crimp, stripper, and dies are VERY well made. Good solid feel and easy to use (and more importantly, easy to tell when you are doing everything correctly).
Good luck! |
Anthony -- I also thought that the Liberty compression RCA connectors looked good and without any proof or anecdotal stories about them comparing them to the excellent Canare crimped RCAs, I am dubious. Since I do not have golden ears, I would not want to do a double blind experiment with a Canare terminated subwoofer cable vs. a Liberty or F-Conn compression terminated cable -- at my age, such experimenting has no appeal like it did a few decades ago
I do have a Paladin Universal crimp tool which will probably handle any compression fitting and sure worked great on the Snap-N-Seal F connectors -- I can see why people like making their own cables -- it takes a whopping two minutes to strip and crimp the compression F connector. I found when using the Snap-N-Seal F connectors that I was more confident of a correct fit if, after stripping and peeling back the braid (and on 1694A, it is 95% braid, so much thicker than the usual 60% on most coax) I would remove the plastic bottom part and push it down onto the cable which finished getting a great fit of the braid against the outer insulator and then watch while the dielectric with its foil shield is inserted into the connector body making sure it goes in easily so the foil is not pushed back and then push/twist on the body of the connector and THEN add the plastic compression piece and use the compression tool to insert it and its waterproof O-ring.
I will check E-Bay for Canare dies and Canare or generic crimpers -- and I just may purchase the generic crimpers from PartsExpress and the Canare die so I can make up cables whenever--there is something fun about making up cables.
Mike