| Re: My equalization/room look ok?
I don't really know if your Auto EQ system is correct or not. I assume it works fine. These auto eq systems usually target wide bandwidth corrections (and rightly so) and at frequencies usually above subwoofer problem areas. I see the lowest correction in your photos is 63Hz.
I'm not sure what you're trying to accomplish. The response graphs you have posted are fine other than a dip at 60Hz. As I said you could probably correct a lot of that with sub phase or a bit of sub distance setting.
REW is usually used to correct subwoofer resonance problems. It is used to measure subs and mains speakers (not surrounds or centers). Use it only with the receiver in stereo. It matters not what power your amplifiers are. You set the level at your listening position to 75dB and set REW up for 75dB targets.
brucek
|