Quote:
imbeaujp wrote:
 Hello folks,
I am a new member and I would like to discuss about a subwoofer project using pearless XXLS 12inches driver and passive radiator. I am going to build 2 subs. The subs will be drived by a Rotel RB-1080 and EQ with a Behringher FeedBack Destroyer Pro. Those subs will complete my HT system (5 Yamaha NS-1000 Studio Monitors).
If you have any recomendations regarding the cabinets:
- physical dimensions (total volume, with or wihout drivers ?)
- stuffing (yes or no ?)
- Material (recommendation)
- Driver and passive alignement (back to back ?)
- Etc...
I will post pictures of the building process and keep you inform of the final result.
Thanks !
JP |
So, some general observations..
- Physical dimensions -- I'd go here.. it looks like they've already calc'd it for you.
- Stuffing -- probably, but be aware that it adds to the "perceived" volume of the enclosure. Someone smarter than me can hopefully chime in on this one.
- I'm assuming you're asking what the box should be made out of .. 3/4" MDF. And double up the front baffle.
- Alignment -- I'm not sure it matters (again, I'm hoping for someone smart to jump in), but if I was going to do it, I'd probably have them on opposite sides of the enclosure.
Good luck.
JCD