Quote:
jpmst3 wrote:
 Hey guys,
I have no idea how to use any of the Behringer products. I am currently using an SMS-1 and it works well for sub duty.
However, I am adding a second sub and I have no way of adjusting phase independently on each sub.
Is this something that could be done with the DEQ? Also, is there some sort of auto-eq that can be done using the DEQ and ECM8000?
Sorry for the dumb questions but I really have no idea how any of these product work and what the capabilites/limitations are... |
phase (I think) is analogous to time delay, off hand I can't recall if the deq has that capability, would have to check. If all you are doing is sub eq then I would not be sure the extra expense of the deq would be worth it.
The deq can do auto eq, but in the few times I've checked it against REW it is not a super high degree of accuracy (I take the rew readings over the deq...valid??) but can certainly help. I would assume that you can/will use REW anyway so you can always tweak the auto eq results, or just go straight to rew and do it manually.
Doug, it doesn't seem to be this thread, but I recall you saying once about using eq to correct speakers, what method/procedure do you use?