| Re: connections
I think brucek has a diagram floating around somewhere.
That cable to the receiver should be from the output (line out) of the computer's soundcard. It can be connected to an input on your receiver or the input of the BFD so that the test sweep can be played through your sub.
Mic >> UB802 Mic Input >> UB802 Tape Out >> Computer Soundcard Line-In >> Computer Line-Out >> Receiver or BFD Input
Make sure you activate the Phantom Power on the UB802. You may have to adjust the controls on the UB802 to set the input of the REW properly.
I think I got that right.
|