I ran my first graph yesterday.
It has taken me many hours and $$$ just to get to that point. Now I have hit a few snags.
1. I have a big wide peak that is centered around 36 hz and rises 13 db above my 75db target. I also have several smaller peaks and dips. This is without the house curve. Find peaks is set from 20 to 200 hz. In the filter tasks panel I am not getting a peak table after measuring response. I have fooled around with manually putting some filters in place but wonder why I am not getting anything under the peaks table.
2. House curves? I have entered one and displayed it. It has an 8db rise from 80 to 30 hz. By what method do you get your response up to the level of the curve? You can't raise the target. Do you raise the trace offset?
3. I have a Revel B15. It has a 3 band equalizer. My inclination is to turn off it's equalization, set levels to zero, and work with Rew and the 1124p without mixing in the subs own equalization. Any thoughts.
I know it would help to let you see the graph but I can't. I did not save the measurements and I am away from home today. Just thought I would get a head start on my next session. Thanks.
Tom
Behringer 1124p
external usb live
Galaxy 140
Revel B15