Quote:
F1 fan wrote:
 If it uses better drivers than your current CC and it if uses the same drivers and crossover config of your towers it will be likely be a better voice match with them.Either way will work but stricltly for looks I would use the same driver layout as the VR920 but the crossover may need tweeking if this is done.the width of the box should not be changed much as the crossover has been optimised for that width.iYou can however change the height and depth but keep in mind that the enclosure needs to have the same internal volume if you intend to have the same bass extension as originally intended. |
I understand that I need to build the box with the same air space and I think the drivers will fit vertical just like the tower, It would be deeper but not as tall (24" tall)
The air space its about 1.5 to 1.75 cft, not really sure but I probably be able to get the exact internal dimensions from a tech @ boston or my body Sonnie
(crossover may need tweaking) How can I do that if I build it like my cc ?
The width is 9", can I go 10" or 11"?
The port its on the rear, so how much room from the port to the wall?
Vertical or horizontal, which one is better?
Thanks!!!
