Quote:
|
I'm using the x-over on the sub itself for the rear located sub. I did try crossing them both over at 60hz on the receiver but that created other problems
|
OK, so you used an 80hz crossover on the processor and then dialed back the rear subs internal crossover to around 60Hz. Strange, but the proof is in the final results. The same for phase..doesn't matter where it's set if the final result is a smooth response at the listening area.
How are you going to accomplish that 60Hz crossover on an IB in the rear location - it has no internal crossover - unless you use something like an X-30 after the BFD channel or perhaps use the BFD to affect a quasi cross......
brucek