Quote:
Bent wrote:
 I'm (still) doing a 23"x23"x43", "every outside wall doubled up" 3/4 mdf sealed box with two dual 4 ohm 15" RL-p's which will be wired for a total nominal load of 4 ohms. It should net at about 7 - 7.5 ft^3 after bracing and polyfill.
I'll drive it with my ADA 1200 and Eq it with my BFD 1124p.
I have high expectations of this project. |
That sounds pretty cool! Do you have a build thread or pictures? The out side of your box is much bigger then mine but you don't seem to get too much more volume. I just figured that the polyfill should more then make up for the bracing. But I never did any calculations!
I have high expectations for mine aswell!
