| Re: Well...I'm at it again!!!
The X series drivers were designed as our "entry level" car audio sub. They have 16mm of Xmax and 250W RMS power handling. They come only in dual 4 Ohm coil configurations so they can be wired for a single 8 Ohm load per driver or in pairs for a single 4 Ohm load.
As they were car oriented they tend to push for EBS alignments in most home applications. They make for a nice home sub, but not particularly a ultra deep HT sub.
There have been a couple of people that have done 6 cuft enclosures tuned to 23 Hz for home/music use using some of the common plate amps out there. As many have a SSF set to around 20 Hz it seems to work well overall.
Specs for the X12 are:
Fs 25.7
Re 3.9 Ohms per coil
Qms 4.01
Qes .38
Qts .35
Sd 481 cm^2
Vas 104.1 l
Xmax 16mm
BL 20
Spl 88.6 1W/1m
250W RMS
Specs for the X10 are:
Fs 25.9 Hz
Re 3.9 Ohms per coil
Qms 3.90
Qes .35
Qts .32
Sd 310 cm^2
Vas 45.7 l
Xmax 16mm
Bl 20
Spl 85.4 1W/1m
250 W RMS
Both work well in mid/low 20 Hz builds in medium enclosures. They are well suited for music applications, but not as well for ultra deep HT setups. You could make some decently compact mid 20s tuned music/computer subs with them as well.
Ill see if I cant get some multi driver deals going if people want them as well...
Thanks,
Scott
|