[95gp]

Thanks for the help with the resistors, but I have more problems. Today I got the resistors I needed so I soldered them in and threw in the board. The set tried to come on and then shut off and the power indicator blinked, looking at other posts I knew it was either a bad soldering job by me or a bad soder joint on the board from factory. I looked over the board and resoldered the chips for good measure and then put it back in....same thing happened. This is when I decided to try the old IC chips in (at least they would power up the tv) and once again a blinking power light and 2 resistors blew (I was expecting this since those chips were bad) No repair shops in my area want to touch it either. Why would it be doing this? They look to be the same resistors, but I would like to know for sure locations are 3151 and 3152. Any further help would be appreciated.