Hi everyone, listen I know that I'm not real good with all things electronic but after buying a new sound card installing it and downloading all the latest updated drivers. after starting REW and attempting to go through the process of calibrating a sound card and importing the RS CAL file into REW. IO can tell you that I'm about to pull out my hair or whats left of it. I can seem to get this program to work for me. I followed the setup of the sound card with the loopback no problem calibrated the RS SPL with the tone through the sub to 75 db. once again no problem so why doesn't it work when I try and run the measurement. sound comes out of the sub like its supposed to but when I look at the results its a straight line. tried changing the crossover didn't change anything. so now here is the fun part I unhooked the RS SPL meter from the sound card and ran it again the same result came back. its like the RS SPL meter was never in the loop to begin with.So being the smart guy that I am I moved to another computer with a different sound card same end results even without the RS SPL hooked up I am getting a phamtom result. PLEASE tell me whats wrong with my setup. I can't believe that I am the only one who can't figure this out
