[95gp]

I checked for voltage at the ic chips and it's got voltage there but I don't know the proper voltage or which designated pins I should be checking. The two fuses on the other boards are good too. I don't know what I could have done to it, I mean it worked ok before removing the board. You don't think I messed up the wire locations? My labels for the connecters for the crts came off but they're labeled on the board and have a band of color designating what wire controls which crt unless they screwed up at factory. You wouldn't happen to have a schematic of the convergence board? It seems the service manual for this tv is hard to come by.


Thanks again
Mike