[spudbudy]

hello gang, yes only 1 chart as I fell it looked the best but, I have others to post if needed. I have 2 velodyne subs the small/old 1 is model VA8100X and the 2nd and larger sub is model DLS5000R. both sub now have Y splitters on them as I noticed that it did make quite a difference in db levels. the main/large sub phase is set to 270 and the small/old one is set to 180. crossover is set to 80hz in my AVR both sub xover set to direct. room placement main is @ 7 1/2 from end of room on one side and the smaller one is 6 feet from the opposite end of the room on the opposite side of the room from the main sub. I tried the main sub first, then the small one by themselves next turned both on and thats what I got.