| Setting White Level (picture/contrast)
Hi All-
I could use a little advice on calibrating TVs... I've played around with the THX optimizer, but I feel the white level setting leaves a little bit to be desired in terms of objectivity... I have DVE and Avia on the way, but don't know if they do any better in terms of setting the absolute white level...
I remembering reading somehwere (unfortunately at the time I didn't pay it enough mind to recognize its importance) that the white level should be measured with a proper meter and set to 35 ft-somethings...
Does anyone know what this correct measurement is (along with the units) and perhaps could point me to an inexpensive light meter that reads in such units?
Someone else told me this was only for projection screens, but it seems to me it would make sense to have a standard for all tvs...
|