[wackii]

So you've used the SET MEASUREMENT LEVEL to play the pink noise and you adjusted your receiver to show about 80dbSPL on your Radio Shack Meter..

I did that part... set it to 75db though

Then you've clicked the SET INPUT VOLUME and does the VU meter respond to the signal?

I did not see the VU meter respond... maybe my sound card line-in is incorrect.

Is your souncard selected in the select device pull-down?

yes

Do you have LINE_IN selected in the pull-down?

yes

When you tap or speak into the RSmeter (it's a microphone), does the VU meter and SPL readout respond?

I did not check that... I will double check everything again.

Thanks for the help Bruce.

Al,