[rolyasm]

Hello,
Just reading through the setup manual and it states not to use microphone inputs. I will post a link or a picture of the back of my soundcard. Anyway, want to make sure I am doing this right. So I use the 1/8" stereo out on MAudio connected to Reciever. Then from my SPL to soundcard I use the 1/4" balanced line in since I don't want to use the stereo mic input? So as per the diagram I don't want to use the 3.5mm line in, but rather the 1/4" balanced in?
Also, thinking about he Midi interface. Do people tend to find a better filter set using the interface, or is it just as effective, or more so, inputing by hand? Is the basic difference just speed of inputing data, and how much time does it actually save?

Last Question. I do have a processor ready, but since all I am doing currently is hooking up my subs and tweaking them (don't have mains or surrounds yet), am I reading correcty that I don't even need my processor. Instead of the processor, I am hooking up my soundcard directly to the BFD and running test tones that way?
Thanks.
Roly