Quote:
|
I am using the ecm-8000 mic with XLR.
|
Ah, something that you failed to mention and I assumed a RS SPL meter - hehehehe. It makes a big difference though.
I'm not as familiar with the ECM8000 as Sonnie is (he might also come in and help out here). But my understanding is that it has a pre-amp with phantom power to run it, and so if the M Audio Mobile has its own pre amp with a phantom power mode (which it appears it does) then the quoted answer you received from the other site is quite correct. Simply plug the mic into the XLR mic input.
Be sure to match the same channel on the 1/8" stereo line out connector. I assume it has a left and right that match the two balanced mic inputs on the rear of the unit... REW expects that the same input and output channel is used (i.e. left or right)
brucek