[n737nc]

Ok, here's where I'm at.

I am trying to calibrate the soundcard. In REW, I am in the soundcard page. Settings are as follows...

Output device-SB Live External.....and Speaker
Input Device-SB Live External....and Line in/Mic in
Wave set to 1.000
Output volume-0.501
Input volume-1.000
Sweep level-12.0
Check/set levels with Subwoofer

I have the line out directly conected with the line in, nothing inbetween(is this supposed to go through the preamp?)

I click the "measure" button, and follow the directions in the help box on the bottom. In REW's soundcard page, there are 2 level meters, and you are supposed to match the input meter with the output meter.

I get -12 on the output meter, and nothing on the input meter. Meaning, nothing is coming back through.

This is the point where I am stuck.


I am at work, and have my laptop with me here. But, no way to get an internet conection to the laptop, so no screenshots.

Nick