| Re: Can I use a single channel amp with REW
One thing you might consider researching is the usable bandwidth for the panels you've made. For instance, absorption is only effective when it is thicker than 1/4 the wavelength (when mounted on the wall). So at 1kHz you have a 1 foot wavelength which means you need a 3" panel (or thicker).
The 1/4 wavelength rule shows up with diffusion and lots of other stuff too...
-Mike Bentz ~It's all about compromise~ "It's territorial with the soundboard. So you're mixing and some dude comes by spewing opinions and trying to turn knobs. It's akin to going up to an artist and painting over his unfinished masterpiece. You just want to shove your paint brush up his nose and throw the soundboard out the window!" |