Thanks... Will do this, again... Only better...
Truth is I started this project over 4 years ago. I have hundreds of pages printed from forums, several books, and dozens of pages of thinking on paper = sabin calculations, axial mode & pressure plots, standing wave projections, absorbtion coefficients, poly & flat panel designs, my solutions, etc...
Bad news is I've forgotten the details, although I have great records. Good news is once I had designs it was mostly a matter of building stuff. Take a year out for my medical treatment and here I am 3 years later, getting near the end. With everyones help I am getting back up to speed quickly, and am relieved I haven't found any glaring problems... yet!
Great news is every time I review the early work, I remember the details quick and easy, and it looks like a did a decent job. I remember most of the details of why I think what I do, and did what I did, and it is fitting in with your instructions very well.
I tried to upload pictures, but I failed again. I have to figure out how to meet forum file criteria and how to get the reduced files onto the thread. The photos will bridge my writings to the real world and show what I can't say well enough. Also, my project is complete enough to do some "valid" REW testing, over the next couple of weeks. I expect to have much clearer and more professional feedback very soon. I'll do my best to have concise calculations, estimates, photos, and test graphs within 5 weeks.
My new mains should be here the end of January. The final construction should be done by then. So it will not be long until I can actually do the final configuring of the entire installation.
Thanks to everyone on this thread, and others, for giving me guidance. My confidence is up very much and I beleive we will be getting very good results, especially for my circumstances.
Good News for all in the New Year... back soon... Don...
by the way... "near the end" means of the project... NOT my life... the treatment has been quite successful... ****...