Quote:
|
Any comments or further suggestions
|
You done a lot of aggressive cutting and have left quite a hump at ~150Hz. You need to back off on that cutting to keep a smooth drop. You need to add your mains and see what that 150Hz area looks like. Remember the mains will be overwhelming that area in their addition and you may have a noticeable peak.
I like the look of the pre BFD response better than the after. You're using way too many filters. Not neccessary. I would just lower some of the peaks and then take a stab at adding the mains and see if you can get a smooth transition...
brucek