Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Data and Testing Definitions and Intro
View Single Post
Old 01-03-08, 09:34 AM   #27 (Link)
wbassett
Elite Shackster
Platinum Supporter
Alias: Bill
wbassett's Avatar
Loc: Upper State NY
User: #6427
Since: Feb 2007
Posts: 1,623
  wbassett is offline    
Re: Data and Testing Definitions and Intro


Jim as you probably know, one reading is the actual screen itself and the other is reflection from the screen.

If you look at the DE of all the samples, the screens closest to neutral have the lowest Delta change, which is exactly what we want and expected.
Wilsonart Designer White 234 236 235 L*ab 93.3 -1.18 0.27 xyY 0.312 0.33 83.7 Temp 6533.9

Those are some pretty impressive numbers and even better looking than what we previously thought of it's balance when referenced to C. Still though as nice as it is and as close to neutral, it's not dead on at L*ab 93 0 0. There will be some difference in the reflected light, but as we just saw nowhere near what happens when the screen moves further away from our neutral reference point. So it is still valid to keep the screen at D65. The closer it is, the better it will be, and like I said we just proved that beyond any doubt now.

Winter Mist has a DE of 3. If we could get a TV Winter Mist with no slop error from the mechanical mixing dispencer, I'm sure we'd see a DE even lower but I doubt we'll ever see a DE of 0. I'd say if we had TV Winter Mist at the dead on 220 220 220 reading, we'd probably see a DE of 1 or 2, so 3 is very very good and 4 is also outstanding. Based on all the other tests and readings we've taken it looks like a DE of 5 or less is ideal but don't quote me on that, we're in some new territory here right now and still have to sort a few things out. But DE<=5 is looking about right.

Also remember why I went with Gray Screen over Winter Mountain. I had a theory that a slightly reduced red level would aid with ambient light viewing, and from all my testing that seems to have held up as valid... but we can't go crazy and drop the red too far. GS is still a very close near neutral but with just a slight decrease in red and as we know ambient light tends to add red to the image so it works out in the end. With lights out the red isn't down enough to have any detrimental affect on the picture.

Dice/Luminous White matches the same profile as Gray Screen with slightly lower red levels so I expect its ambient performance to be comperable to GS but still yield better colors since it's a brighter screen at a darker shade of gray.

2007 was a long year and lots of waiting but we're tying up all the lose ends now and it is satisfying to see things come together and not throw a wrench into everything causing a step back and punt situation. We have an extremely solid foundation now and the rest of the 'house' will go up in record time once all this is done.


"Make everything as simple as possible, but no simpler." - Albert Einstein

"If all else fails, spin the cat."- Grzboken

Forum Rules Reply With Quote