Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - 2nd time around..measurements
Thread: 2nd time around..measurements
View Single Post
Old 01-03-08, 11:46 AM   #41 (Link)
DrWho
Senior Shackster
Alias: Mike Bentz
DrWho's Avatar
Loc: Chicago
User: #2782
Since: Sep 2006
Posts: 236
  DrWho is offline  
Re: 2nd time around..measurements

Quote:
Mattlock wrote: View Post
the port is an 8x26.75. The port (top) is exactly opposite the driver(bottom), ie sonosub design. My crossover is set at 80hz so my focus has been below 80hz.
That doesn't mean it's not going to be an issue...

Harmonic distortion will trigger the resonances, not to mention the crossover isn't instantaneous so you've still got the driver itself triggering them too. It's probably why your distortion measures so high.

-Mike Bentz
~It's all about compromise~


"It's territorial with the soundboard. So you're mixing and some dude comes by spewing opinions and trying to turn knobs. It's akin to going up to an artist and painting over his unfinished masterpiece. You just want to shove your paint brush up his nose and throw the soundboard out the window!"
Forum Rules Reply With Quote