| Re: I think I have a problem.
That's great news, it's always nice to hear that someone else likes the look of your graphs!
It's put off my need to buy a new sub by at least 6 months. The prices of a velodyne DD18 helped too; £3,000!
Anyway, I have a further question for you. Currently my BFD is sitting between the HTPC and the multi-channel-in of my receiver, on the sub channel. This means that only the HTPC is being equalized. My cable box also goes into the receiver and is decoded to Dolby Pro-Logic II and then sent out to the power amp. I've got it set up this way for cabling reasons; it's a long and dull story but I can't connect the BFD output to the sub directly, yet.
My question is if I move the BFD from one side of the receiver (from before the signal goes in to after it comes out) do I need to re-sweep and re-equalize? The processing sequence is irrelevant, right? It's all about the position of the sub and the settings. Whether the BFD gets the pure signal or the signal that's been processed should make no difference, should it?
|