Quote:
brucek wrote:
 I t would appear you don't have any crossover engaged on your mains. When the sub and mains combine you may have a bit too much bass.
Have you taken a reading with sub + mains?
If you have set your levels with the subwoofer test signal, be sure the End Freq setting in the measurement tab is at 200Hz, so the overall measurement level won't be too low. Also don't forget to use the set target level routine.
brucek |
Could you explain how you can tell that I don't have the crossovers engaged on the mains? Just trying to learn how to decipher the measurements.