Quote:
|
Although I think maybe I just figured out the 'manual' way of doing it. By ear, and not very scientific, but still...
|
What about feeding the REW mono signal to the AUX (left and right) input of your receiver, then put the receiver in stereo mode so the LF and RF speakers are in play, then leave the LF hooked up normally, but disconnect the RF speaker and replace it with the LR.
Now the Energy/Time graph in REW will show two speakers at the listening position. LF and LR. The distance betwen them is the difference in time to the listening postion - or something like that anyway....
brucek