Quote:
|
I have been connecting using only the Right rca input jack to the SPL meter's output (sound card's Right input) and then the Right rca output jack to the receiver.
|
Correct...
Quote:
|
Are you saying I should use a Y cord to take connect to the SPL meter's output and run the other end to both the L/R RCA input jacks on the sound card?
|
No, leave the SPL meter as it is, I'm saying to take the simple mono output from the soundcard (as you are doing now) and feed it to the AUX input of your receiver (using a Y-splitter). This is the normal way everyone hooks up REW. It allows left and right speaker to be engaged.
Quote:
|
And lastly, should I use the subwoofer signal for the speaker calibrations as well?
|
Yes, because we're interested in their response from 15hz-200hz.
brucek