[stephenb1]

Hi,

I don't turn the sub level up much at all, only around half on the left and a around a quarter on the right sub , there is a problem with the left as its getting quieter ( i think a component is failing ) although i have bought another on e-bay which should arrive next week.
The subs are the not so well loved ps1000 's , but i have always liked them.

This is only really about getting the timing pretty spot on for music,
movies seem to play very well, probably too much bass for the neighbours ?

I did some experimenting earlier as my amp has 3 sub outs, one left, one right and one mono. The mono reads twice as much on a test meter and higher though the bfd than left or right.

So using the mono for left ( for now ) and right normal, i listened to it again and the bass sounds much more whole, rounder and louder, even through the dodgy left sub.

So thinking if i increase the output to both subs with a pro line driver as i have on some 4 x 12" PA speakers and in the car, as it worked very well in the past it hopefully will give the same effect, as mentioned.

Which is why i was wondering if any of the behringer products may increase the volt output to the subs ?