[avaserfi]

I finally got my mic back after being calibrated and am trying to figure out how to set everything up with REW. I have a Xenyx802 unit an ECM8000 mic and a Soundblaster Live 24 USB and a regular RS SPL. I tried hooking everything up as I thought would work, but REW doesn't seem to get a signal from the mic.

I have the soundcard setup according to the REW instructions and have the ECM8000 plugged into the Xenyx with a 1/4" to RCA running to a RCA to stereo from the Main out R to the mic in on the soundcard. Then a wire running from the soundcard to the receiver.

Sorry if this is a little convoluted. I was pretty excited to finally use my mic, but am now lost.

Thanks.