[aktiondan]

Thanks for the responses. I was leaning towards the PE plate amp, but it seems like every other day I keeping going back to the Behringer. I'm just drawn to the thought of all that power. As well as getting to try out the BFD. A few years ago I built a sub out of one of the older TC Sounds drivers and powered it with a 1,200W QSC amp and it was absolutely insane. Until I got carried away with the 20Hz sine waves and cooked the thing. So there is a bit of hesitation to go down that path again, I'd rather stay on the conservative side of things just in case. Especially since how the sub will be used/treated/played/abused is sort of out of my hands since it won't be in my own home. I mean, you just never know.

At any rate, I threw together the cut sheet for the pieces and drew up a side view of the internals. Should be a decent sub, hopefully I'll get to keep it for a few days after its finished before my friend wants it. I'll be sure to run some REW numbers on it too. I've got a brand new uncal'd EMC8000 mic that needs to get used for something.