Quote:
Egil wrote:
 How far would I have gotten without you guys? Hehe.. Thanks 
It's a good thing you noticed the DCX vs the FBQ - I had no idea there were 2 "2496".. So I'll go for the DCX then!
Front baffle will be double (2x 19mm) - same with the rear. The rest will be 19mm.. Think that will do? |
That's okay. Of course it's preferred to use some internal bracing too.
Quote:
|
And yes - I'll be using a 8" port. Are there any pro/cons having one 8" vs 2x 6" ports?
|
Two 6" ports will give you slightly more port area, but of course then they have to be slightly longer. If you're heading for the 23 Hz tune, the 8" port should be around 65 cm long; 70 cm if using a port with trumpet heads (recommended). Two 6" ports should be 80 cm / 84 cm, correspondingly.
Quote:
|
Edit: And one last thing - is it possible to 'control' more than one subwoofer on the DCX2496 ? (I want to use both my Rlp15" LLT and the new Rlp18")
|
Yes, it can control up to 6 subwoofers.