| Got an idea, and have a question for BFD users
Hi.
Having succesfully used the Behringer DSP 1124 on my PB12+ sub and being so impressed with the results I was beginning to wonder if it is adviseble to also use a Behringer on the main speakers?
Challenge:
Moving into a new house and I am possibly buying Vienna Acoustics Strauss main speakers. They sport 10" woofers and can play fairly deep. However I will have little or no control over that bass, since my AV reciever has poor built in EQ. It's a pioneer AX2. Seing as they can play fairly deep it's my plan to crossover at around 40-50hz. I can use my current Behringer to reduce peaks then from 50hz down, which is all good, but then I'm left with no bass control from 50 hz and up....
So I thought, what about adding a second Behringer! I use my pioneer reciever as pre amp only since I recently bought a Primare A30.5 power amp. I could then plug in another Behringer between the pre out on the pioneer and the power amp.
Is this a good plan or should I go a different route?
/claus
|