| Re: extremely frustrating
Well i believe it was at about 5/10 gain, nothing sounded wrong and it only took a split second to hear bad slapping noise( prob leads extending fully ) and then snap and vibrating noise of loose lead hitting back of cone while other coil was still operational. I will upload a picture very shortly. It just seems weird, i've never heard of a speaker reaching a mechanical limit in this way, shouldn't leads be well over long enough for a number of other mechanical limits to be met first?
My 8.5 cu.ft box have dual 4inch dual-flare ports that are 52in long which is roughly a 12hz tuning. I do believe it was a very short burst below tuning but i'd never expect the leads to be this short as i've already stated.
I've just tried to call but no answer for the time being, i will update any news from diycable.
|