Prof that is actually being worked on too. One of the problems with powders is they aren't typically a local item either, and then there is working out exactly how much equates to the same 8 ounces of HE558 or the previous PFG component. Needless to say 8 ounces of powder isn't the same as 8 ounces of a premade compound.
| Plus I think it is very important to state that with the wrong type of aluminum powder, when added to water it can cause a very nasty reaction. So no, at this point in time we don't have any powders ready to be recommended. We're still testing in that area. |
 |
Performance and balance wise when we're done with that testing it will be the same and if we can make this even easier that's the goal.
A lot of people wanted to hear something substantial and we finally have some tested ways that we are recommending. Another reason for not just waiting for a powder based version is people started buying aluminum paint and I know some were getting solvent based and not water based. That's not going to mix or apply well with a water based latex so rather than people having a bad experience and walking away disgusted it was time to give the details along with our recommendations of what we found to work the best.