[benjatelcom]

I do already own the RL-P15 and the EP2500. If you guys think the single driver wouldn't run the IB system at a satisfactory level, I will opt for a single driver in a table-like vented enclosure. Easy to build, easy to move.

I don't want to throw money at a second driver (and perhaps a second amp) since I have to purchase another HT system to replace the equipment I am pulling out of my living room.

I can place an enclosure against the wall, under the projection screen, but I won't have a free corner (this is where my A/V/network rack will be located).

I could make an enclosure that is horizontally long, that resides under the screen in front of the wall, and I could use a normal coffee table in that situation. It would also keep people away from the projection surface. In this configuration, would it be best to face the driver out towards the couch, or on the side where it can parallel with the 35 inch port? I would estimate that 24hx24dx120w (inches) would be the maximum dimension constraints of an enclosure under the screen (the wall is 14 feet from the edge of the room to the doorway). The more I think about this design the better I like it. Short cable run from the amp too.

Thanks for the help, even though I am still brainstorming on this project, I'm interested in everyones ideas.