| Re: FBQ 2496 output is flat after power off/on
I have BFD's, but I can't imagine that the FBQ acts any different. If I power on and off, everything returns as it was before the power down.
So, that would appear to be a fault to me.
Most people simply leave their BFD's on all the time to avoid the annoying turn on thump. They draw less than a night light. Most equipment you own draws similar current even when shut off, so as to keep the remote capability alive. So, I wouldn't worry too much about wasting power if you choose to leave it on all the time.
brucek
|