[Wayne A. Pflughaupt]

Looking at your baseline response...






...I suggest raising your Target Level before equalizing. It’s too low – that’s probably why you’re having a hard time dialing in a house curve.

I was surprised how well I could get the response using only 3 filters! Basicly just used one a 20hz, a 3db boost at 30 hz and a major -17db at 36 hz.

Don’t use the 30 Hz filter, since you’re not seeing any results on the graphs. What you might do is add a filter to the upper end of your response to help it conform to the house curve you want.

Regards,
Wayne