corner bass traps
parts (yours may vary depending on the width of your corner traps). this is for 12"x12"x17" corner. 17" is the front facing
- 1"x2" wood long enough to floor to ceiling in your room and some for bracing at middle of frame.
- fabric enough to cover the width/length of the frame, mine is 106" x 24"
- industrial velcro
cut the OC703 into triangle chunks.
cut a few 1"x2" wood at 45 degree angle about 4" lenght for bracing at top/bottom/mid height. attach with velcro
frame
attach velcro to top and bottom of frame
done.
Enjoy!!