| Re: Couple odd problems with REW
Looks like you are running Vista so you won't have the same mixer setup as windows. Right click the system tray volume icon when REW is running and select "Open Volume Mixer", make sure the volume control for REW is at the top.
The reason for the offset in the soundcard cal would be having the levels set higher than the reference level during cal. A screenshot of the Impulse Controls graph page after doing a loopback will verify that all is OK for that measurement. Beyond that it will be a case of getting the input level on your TASCAM set correctly. If you use the RS SPL meter then that is a direct line level input and might be an easier way to get going than having to tweak the mic input gain with the ECM.
|