| Re: Is there a way to average a particular Decay Time and generate filters on that
First there is no sub. They are 3 full range speakers (that was just one). Everything on the audio system is set flat. It's the placement and room doing most of that. But since they are full range speakers I have little choice where to place them.
I do normally use Log scale. I was comparing the effect of Filters in Meridian Software vs REW to see if the parameters I was using from REW is compatible. Using Generic EQ the Gain seems the same, and the Hz (Width) displayed in Meridian seems to match exactly. I was Matching both vertical and horiz scales to look at the shape of the filters. The shape and interaction of filters looked Identical to generic.
Note that I was calibrated at 84 so everything there is 9db high than what you are used to looking at.
I will Cal to SPL 75 and use Log scale in the future.
|