Quote:
brucek wrote:
 I didn't realize the Meridian system was so sophisticated.
I take it you don't like the results of its Auto system ?
For sure. And you can also add a house curve file to the target reference and then hit Apply Windows to get a new result that might be better than the flat reference level.
Once you have your measurement mdat file stored you can then play around with REW off line and create all sorts of what-ifs.
brucek |
It's auto system isn't too bad (the theory behind it is very good). But now that I understand better what it's missing is it doesn't allow you to override the target level at that target decay you are allowed to set. So you basically keep pushing in the target decay in (towards 0) until a reasonable set of filters come in. It might not be at the ideal target though (or the best for all speakers). With REW it looks like I can control both. The target decay also has to be the same for all speakers but you can work around that with a lot of cutting pasting.