Quote:
JohnM wrote:
 Are you using a mic input? |
Yes I am. With mic input in setting menu of REW also.
Quote:
|
Some are only sampled at 16kHz, so they have no response above 8kHz.
|
The mic or mic input?
Quote:
|
You need to use a line input.
|
Hook the RS mic to the line input on the sound card?
Quote:
|
Do not rely on the RS meter above 1kHz or so, it typically has a pronounced bump in its response at around 5kHz or so and is generally poor above 1-2kHz. Make sure the meter is set to C weighting and not A weighting.
|
I guess thats the bump I see after 2khz in my graph. The c weighting is on.
I also have my HK mic. For Ez/Eq auto calibration. How would this mic work out is used with REW?
I noticed that all mics are left channel only, should I "y" split it to a stereo jack or leave it left channel? Being I will use the Line input instead of the mic input.
I followed the direction pretty well, I did not read anyone else having this issue. Is it just my PC mic input?
Jake