Quote:
|
Hook the RS mic to the line input on the sound card?
|
Yes, the RS meter outputs line-level signals. Mic-inputs are not suitable.
You need to go to our download section and get the calibration file for the specific RS meter you are using. RS meters are not reliable above 1KHz.
Quote:
|
or leave it left channel?
|
Use left or right, it doesn't matter, since you select the channel in REW to match the channel you have it connected to.
Quote:
|
I followed the direction pretty well, I did not read anyone else having this issue. Is it just my PC mic input?
|
The
REW HELP FILES tell you to use only a line-in..........
A soundcard (internal or external) which supports full duplex operation (simultaneous replay and recording) with line inputs and outputs. Inexpensive soundcards are typically adequate, a reference measurement is used to remove the soundcard's frequency response from the measurement. Examples of USB soundcards which have been found to work well are the Soundblaster MP3+, Soundblaster Live! 24-bit USB External and the M-Audio MobilePre-USB. Note that microphone inputs are NOT suitable and should not be used.
brucek