| My Dual RL-p15 Sealed Design
This is my intention for my dual 15" RL-p in a sealed config.
2 - D4 RL-p's in a box that stands 46" tall, and 22" by 22" wide.
I'm new to sketch-up, but was wondering about your opinions,
I'll be using my old Adire Audio ADA-1200 to drive it wired for a combined 4 ohm load.
The enclosure will have two internal braces with approx 6" space between each brace, and the front and rear baffles will be tied together with 1/2" dowels to elliminate resonance.
The sketch doesn't show it (again, I'm new to sketch-up), but all walls are to be doubled up 3/4" mdf, including the front baffle which the drivers will be mounted. I intend to recess mount the drivers approx 1/4" in for aesthetics mostly, and the ADA-1200 will sit on the back at a convenient height.
on the plinth, the total height will be approx 49"
Last edited by Bent; 02-14-08 at 10:57 AM.
Reason: I added a plinth to the sketch.
|